+8618007495456

How to prevent stainless steel fasteners from being locked

Feb 11, 2022

How to prevent stainless steel fasteners from being locked


Fasteners are also commonly referred to as standard parts in the market, and are a general term for a type of mechanical parts used to fasten and connect two or more parts (or components) into a whole. It is characterized by a wide variety of specifications, different performance uses, and a very high degree of standardization, serialization and generalization. Fasteners are the most widely used mechanical basic parts and are in great demand.

steps/methods

  1. Correct product selection: Before use, confirm whether the mechanical properties of the product can meet the needs of use, such as the tensile strength of the screw and the guaranteed load of the nut. The length of the screw should be selected appropriately, and the 1-2 pitch of the nut will be exposed after tightening.

  2. Before use, check whether the threads are rough and whether there are iron filings or dirt between the threads, which often lead to locking.

  3. Lubricate the fasteners before use: It is recommended to use butter, molybdenum disulfide, mica, graphite or talc for lubrication. At present, wax dip treatment is generally used for lubrication and anti-locking.

  4, pay attention to the use method:

  a. The speed and force of the screwing-in should be appropriate, not too fast or too large. Use a torque wrench or socket wrench as much as possible, and avoid using an adjustable wrench or an electric wrench. Excessive speed will cause the temperature to rise rapidly and cause lock-up. Import pump valve

  b. In the direction of force, the nut must be screwed in perpendicular to the axis of the screw.

  5. The use of washers can effectively prevent the problem of over-tightening.

6. Locking or seizure often occurs on fasteners of stainless steel, aluminum alloy and titanium alloy materials. These metal alloys themselves have anti-corrosion properties. When the surface is damaged, a thin oxide layer will be formed on the metal surface. to prevent further corrosion. When the stainless steel fastener is locked, the pressure and heat generated between the teeth will destroy the oxide layer, causing blocking or shearing between the metal threads, and then sticking. When this phenomenon persists, the stainless steel fasteners will be completely locked and can no longer be removed or continued to lock. Usually this series of blocking_cut_adhesion_locking occurs in just a few seconds, so the correct understanding of the use of this type of fasteners can prevent this phenomenon.


Send Inquiry