How to adjust the grinding depth during metal processing?

How to adjust the grinding depth during metal processing?
In hardware processing, we need to adjust the size of various tools to match the size of precision parts. Only in this way can we create the various sizes we need. Adjusting the grinding depth is one of the more complex aspects in the whole metal processing process
The milling depth shall be adjusted according to the tooth thickness to adjust the small module gear. Generally, gears can be milled at one time. When adjusting the grinding depth, children's teeth can be milled at the grinding depth close to the full tooth height. Tooth thickness.
Then, according to the actual thickness of the tooth thickness, adjust the grinding depth accordingly until the tooth thickness meets the drawing requirements. For cutting gears with large modulus, it is necessary to carry out rough and fine milling twice. The grinding depth of finish milling can be adjusted by the thickness of rough milling teeth.
After adjusting the grinding depth, formal milling can be started. After the teeth are milled, the indexing head is indexed, and then the tooth groove is milled until the pure teeth are milled.